swupdate-ipc¶
swupdate-ipc sends a specific command to SWUpdate. The following commands are enabled:
aes¶
send a new aes key to SWUpdate
setversion¶
sends a range of versions that can be accepted.
gethawkbit¶
return status of the connection to Hawkbit.
sendtohawkbit¶
send data to the Hawkbit Server. A typical use case is acknowledgement for activation by an application or operator after a new software has been installed. The tool can forward the result for the activation to the hawkBit server.
sysrestart¶
send a restart command after a network update
DESCRIPTION¶
- aes <key> <ivt>
- AES key to be used for decryption
- setversion <min> <max> <current>
- configure the accepted range of versions
- hawkbitcfg
- configuration for Hawkbit Module
| -h | help |
| -p | allows one to set the polling time (in seconds) |
| -e | enable suricatta mode |
| -d | disable suricatta mode |
- swupdate-sendtohawkbit <action id> <status> <finished> <execution> <detail 1> <detail 2> ..
- Send Acknolwedge to Hawkbit server after an update if SWUpdate is set to wait for.
- sysrestart
- Used with SWU handler, allow to perform a network restart
| -r | optionally reboot the target after a successful update |
| -w | waits for a SWUpdate connection instead of exit with error |
| -s <path> | path to progress IPC socket |